Antenna and Wave Propagation

1 To find the plane of polarization of vertical  and horizontal antenna.
2 To plot the polar diagram of Half wave  dipole antenna
3 To plot the directivity pattern of a ferrite  rod antenna
4 To plot the radiation pattern of (i) Folded  dipole (ii) FDP with reflector
5 To plot the radiation pattern of Yagi  antenna
6 To plot the radiation pattern of stacking method of Yagi antenna
7 To plot the plane of polarization of a circular antenna
8 To plot the directivity pattern of End-fire and Broadside antenna
9 To plot the directivity pattern of Rhombic and Log-periodic antenna
10 To plot the directional pattern of Slot
Download

Autodata Diagnostic Trouble Codes: Fault Locations and Probable Causes 2004

Autodata - Diagnostic Trouble Codes Fault locations and probable causes - 2004 edition is written by Anonymous. You can download Autodata - Diagnostic Trouble Codes Fault locations and probable causes - 2004 edition eBook at Bookchums.com for Freet in PDF format. The book is also available for Online reading at Bookchums.com. You can also Review Autodata - Diagnostic Trouble Codes Fault locations and probable causes - 2004 edition here.

Analog Electronics

1 FREQ. RESPONSE OF NEG. FEEDBACK AMPLIFIER
2 BUILD & TEST COLPITT OSCILLATOR
3 BUILD & TEST HARTLEY OSCILLATOR
4 BUILD & TEST WEINS BRIDGE OSCILLATOR
5 BUILD & TEST UJT AS A RELAXATION OSCILLATOR
6 OUTPUT CHARACTERISTICS OF N-CHANNEL JFET
7 CALCULATE rd, gm and μ for JFET
8 MEASURE OP-AMP PARAMETERS
9 STUDY OF INVERTING AMPLIFIER USING OP-AMP
10 STUDY OF NON-INVERTING AMPLIFIER USING OP-AMP
11 STUDY OF DIFFERENTIATING CIRCUIT USING OP-AMP
12 STUDY OF INTEGRATING CIRCUIT USING OP-AMP
13 STUDY OF OP-AMP AS SUMMING AMPLIFIER
14 STUDY OF OP-AMP AS V TO I CONVERTER
15 ASTABLE MULTIVIBRATOR USING IC 555
16 MONOSTABLE MULTIVIBRATOR USING IC 555
17 BISTABLE MULTIVIBRATOR USING IC 555

Optical Communication

1. Plot characteristic of LED
2. Plot characteristic of LASER diode 
3. Plot characteristic of Photo Diode 
4. Plot characteristic of Avalanche Photo Diode 
5. Establish Analog communication optical link 
6. Establish Digital communication optical link 
7. Measure N.A of optical Fiber 
8. Build and test LED drive circuit 
9. Analog Transmitter Receiver 
10. Digital Transmitter Receiver

Download

Circuit Design and Tools

1 PCB INTRODUCTION
2 ORCAD  INTRODUCTION
3 CAPTURE ENVIRONMENT
4 CREATING DESIGNS
5 PROCESSING DESIGN
6 CIRCUIT SIMULATION
7 CIRCUITS
8 CREATING PCB USING LAYOUT
9 QUE - ANS

Download

Digital Communication

1. PULSE CODE MODULATION
 
2. DELTA MODULATION
 
3. ADAPTIVE DELTA MODULATION
 
4. DIFFERENTIAL  PULSE CODE MODULATION
 
5. AMPLITUDE SHIFT KEYING
 

Electronics Instruments & Measurements

1 WHEATSTONE BRIDGE
 
2 MAXWELL BRIDGE
 
3 SCHERING BRIDGE
 
4 HAY’S BRIDGE
 
5 LISSAJOUS PATTERN
 
6 HARTLEY’S OSCILLATOR

Industrial Electronics

1 Plot V/I Characteristics of SCR  
2 Plot V/I Characteristics of TRIAC  
3 Plot V/I Characteristics of DIAC  
4 To observe the Characteristics of UJT
5 To Study And Perform The UJT as Relaxation  Oscillator.
6 To Study and Perform the Triggering of SCR using UJT
7 To Study The Photo Electric Relay.  
8 To study the resistor triggering circuit for SCR.  
9 To study the performance & waveforms of HWR by  using RC triggering Circuit.
10 To study the performance & waveforms of FWR by  using RC triggering Circuit

Download

Microprocessor and Assembly Language Programming

1 ADDITION OF TWO 8 – BIT NUMBERS
2 SUBTRACTION  OF TWO 8 – BIT NUMBERS
3 ADDITION OF TWO 16 – BIT NUMBERS
4 SUBTRACTION OF TWO 16 – BIT NUMBERS
5 MULTIPLY TWO 8 BIT NUMBERS USING SUCCESSIVE ADDITION METHOD
6 WRITE A PROGRAM TO MULTIPLY TWO BIT NUMBERS USING SHIFT AND ADD METHOD.
7 DIVIDE 16 BIT NUMBER BY AN 8 BIT NUMBER
8 ADD TWO 16 BIT BCD NUMBERS
9 SUBTRACTION OF TWO 8 BIT BCD NUMBERS
10 TRANSFER A BLOCK OF N BYTES FROM SOURCE TO DESTINATION

VLSI DESIGN

1 Introduction to VHDL.
2 How to work in xilinx 13.3
3 To study VHDL entities and coding styles
4 To implement various basic logic gates using VHDL
5 To implement various universal logic gates using VHDL.
6 To implement Multiplexer using VHDL.
7 To implement Flip Flop using VHDL.
8 To implement Full adder and Half adder using VHDL.
9 To implement Decoder using VHDL.
10 To implement Encoder using VHDL.
Download

MAINTENANCE OF ELECTRONICS EQUIPMENT

1. Concept of Maintenance
2. Testing of various Passive Components (Fixed and Variable)
3. Testing Diodes and Transistor with millimeter.  
4. Testing FETs and MOSFETs with Multimeter.  
5. Build and TEST FET/MOSFET Tester.  
6. Tracing Schematics  
7. Computer Peripherals  
8. Disassembling Computer System.  
9. Reassembling Computer System.  
10. Motherboard and Trouble shooting.  
11. Keyboard and Scanner.
DOWNLOAD

MULTIMEDIA COMMUNICATION

1 To study different types of signaling tones and DTMF signaling used in telecommunication.
2 Calculate the blocking probability of any network using  MATLAB.
3 Develop a code to analyze of link Budget Equation using  MATLAB
4 Develop a code to get information about a graphic file using imread ( )function of MATLAB
5 Develop a code to write image matrix in to a file using imwrite ( )function of MATLAB
6 Develop a code to enhance an image by intensity adjustment using imadjust ( ) function of MATLAB.
7 Develop a code to add noise in an image using filter2 ( ) function of MATLAB.
8 Develop a code to change color image to grayscale image and other format.
9 Develop a code to extract frames from video files.  
10 Develop a code to convert blur image to original the image
Download

CONSUMER ELECTRONICS

1 To understand working of various stages of monochrome TV receiver.
2 To obtain composite video signal by using   TV pattern  generator and measure its dimensions
3 To visualize / compare the various patterns of color TV pattern generator for fault finding.
4 Operate digital TV trailer kit and observe wave form
5 Verify the performance of LED TVs. Compare performance parameters of at least three brands.
6 Check the wiring  of ACs and explore all the functions
7 Test various functions of microwave oven  
8 Verify  functions of  Camcorder  
9 Explore digital cameras settings.  
10 Explore the various functions of automatic washing machine and locate various sensors used in that
washing machines.
Download

Software Practices

1 To study how to install Matlab and its different tool and functions.

2 Creating and working with Arrays of Numbers, Creating and printing simple plots

3 Create and plot waveforms: Sine, Cosine, Square, Triangle

4 To study input output characteristics of diode.

5 Create and plot Amplitude Modulation Waveform

6 Create and plot Amplitude Modulation (DSB) Waveform

7 Create and plot Frequency Modulation Waveform

8 Create and plot Phase Modulation Waveform

9 Create and plot Low Pass, High Pass, Band Pass and Band Stop Filter design and its Frequency           response

10 Create and plot ASK Modulation Waveform

11 Create and plot FSK Modulation Waveform

12 Create and plot PSK Modulation Waveform

13 Create and plot QPSK Modulation Waveform

Microwave and Radar Engineering

1 TO STUDY DIFFERENT TYPES OF MICROWAVE COMPONENTS
2 TO STUDY GUNN POWER SUPPLY
3 SET MICROWAVE BENCH FOR OPTIMUM OPERATION
4 TO DETERMINE VSWR FOR LOAD
5 TO MESURE FREQUENCY AND WAVELENGTH IN RECTANGULAR WAVEGUIDE
6 TO DETERMINE REFLECTION CO-EFFICIENT AND STANDING WAVE RATIO
7 TO CALIBRATE VARIABLE ATTENUATOR
8 TO STUDY OPERATION OF DIRECTIONAL COUPLER
9 TO STUDY REFLEX KLYSTRON
10 TO STUDY VARIOUS SUB-SYSTEMS OF SPACE CRAFT

Network Engineering Using C

Most interprocess communication uses the client server model. These terms refer to the two processes which will be communicating with each other. One of the two processes, the client, connects to the other process, the server, typically to make a request for information. A good analogy is a person who makes a phone call to another person.

Notice that the client needs to know of the existence of and the address of the server, but the server does not need to know the address of (or even the existence of) the client prior to the connection being established. Notice also that once a connection is established, both sides can send and receive information. 

The system calls for establishing a connection are somewhat different for the client and the server, but both involve the basic construct of a socket. A socket is one end of an interprocess communication channel. The two processes each establish their own socket.

CLICK HERE to download 

Electrical Engineering and Control System

1. Open circuit and load characteristics of separately excited and self excited D.C.Generator.
2. Load test on DC shunt motor.
3. Swinburne’s test and speed control of DC shunt motor.
4. Load test on single phase transformer and open circuit and short circuit test on single phase transformer
5. Regulation of three phase alternator by EMF and MMF methods.
6. Load test on three phase induction motor.
7. No load and blocked rotor tests on three phase induction motor (Determination of equivalent circuit parameters and predetermination of performance characteristics at various loads)
8. Study of D.C. motor and induction motor starters.
9. Digital simulation of linear systems.
10. Stability analysis of linear system using MATLAB.
11. Study the effect of P, PI, PID controllers using MATLAB.
12. Design of lead and lag compensator.
13. Transfer function of separately excited D.C. generator.
14. Transfer function of armature and field controlled DC motor

INTERNET PROGRAMMING

1. CREATING A WEBPAGE USING IMAGE MAP
2. CREATION OF HTML PAGE USING CASCADING STYLE SHEET
3. WEB FORM VALIDATION USING DHTML
4. CREATING A COLOUR PALETTE USING JAVA
5. INVOKING SERVLETS FROM HTML FORM
6. ONLINE EXAMINATION USING JSP AND DATABASE
7. PROGRAMS USING XML – SCHEMA – XSLT/XSL
8. PARSING XML DOCUMENT USING DOMPARSER
9. PARSING XML DOCUMENT USING SAX PARSERS 

Operating System

1. Write programs using the following system calls of UNIX operating system: fork, exec, getpid, exit, wait, close, stat, opendir, readdir
2. Write programs using the I/O system calls of UNIX operating system (open, read, write, etc)
3. Write C programs to simulate UNIX commands like ls, grep, etc.
4. Given the list of processes, their CPU burst times and arrival times, display/print the Gantt chart for FCFS and SJF. For each of the scheduling policies, compute and print the average waiting time and average turnaround time. (2 sessions)
5. Given the list of processes, their CPU burst times and arrival times, display/print the Gantt chart for Priority and Round robin. For each of the scheduling policies, compute and print the average waiting time and average turnaround time. (2 sessions)
6. Developing Application using Inter Process communication (using shared memory, pipes or message queues)
7. Implement the Producer – Consumer problem using semaphores (using UNIX system calls).
8. Implement some memory management schemes – I
9. Implement some memory management schemes – II
10. Implement any file allocation technique (Linked, Indexed or Contiguous)

Wireless Communication

Click Here to Download

Wireless communication is among technology’s biggest contributions to mankind. Wireless communication involves the transmission of information over a distance without help of wires, cables or any other forms of electrical conductors. The transmitted distance can be anywhere between a few meters (for example, a television’s remote control) and thousands of kilometres (for example, radio communication).